Advertisement
• Press and hold Sanremo logo (continuous) button on group 1 (left most group) until touchpad LED's
begin flash and pressure display reads 'DOSES SETTING SELECT DOSE IN 30 S'.
• Insert coffee prepped portafilter into group and select dose button for programming.
• When desired volumetric dose has been reached, press the same dose button to store volumetric
program.
• Repeat steps 2 & 3 for remaining dose buttons.
• Follow same procedure to program hot water tap dispensing volume.
• When finished, do not touch any of the group buttons for 30 seconds. Machine will then store program
and transfer to the remaining groups.
Adjusting water mix for hot water tap
Water mix valve located near water pipe connection
Group Volumetric Programming
PRESS AND HOLD TO ENTER
VOLUMETRIC PROGRAMMING
Advertisement
