Special Functions - Sanremo Milano LX SAP Instruction Booklet

ENGLISH
To exit from the program, press the button K5GR1 or wait for the display to show:
NB: to program a filter head (2 or 3) differently, proceed in the same way as above.
Press the button K5GR1 until the display shows:
Press the button K6GR1 within 30 sec. (K5GR1 and K6GR1 indicator lights come on) and the
display shows
Upon reaching the required quantity, press the button K6GR1.
To exit from the program, press the button K6GR1 or wait for the display to show:
NB: for a second measure of hot water, repeat the procedure on filter head 2 (GR2)
PROGRAMMING CLEANING OF THE (SINGLE) FILTER HEAD
Press in sequence the buttons K5GR1 and K1GR1 of the filter head to be cleaned. The display
shows:
5 cleaning cycles are automatically carried out.
To exit from the program, press the button K5GR or wait for the display to show:
Press the relevant button to obtain the set quantity of coffee/tea.
If a smaller quantity is desired, dispensing can be stopped at any time by pressing any button.
WHAT TO DO IF COFFEE IS NOT DISPENSED UPON PRESSING THE BUTTON
Resolving possible problems:
if a measure is not dispensed after having programmed the machine, the electronic board for
some reason may not have received the pulses from the flow meter and a measure equal to 0
pulses has therefore been programmed.
Possible reasons to be checked: flow meter incorrectly connected or connection made to that of
another filter head, malfunctioning water circuit, closed tap, etc.
A) Technical programming
* To enter the program: switch on the machine and press the buttons K1GR1 and K5GR1 on the
touchpad of the 1 filter head (GR1) simultaneously until the display shows:
st
To change the displayed parameter, use K1GR1(+) or K2GR1(-)
Select Drink
PROGRAMMING HOT WATER MEASURES
Programming
Select within 30s
Programming
Tea water
Select Drink
Washing
Group
Select Drink
DISPENSING COFFEE/TEA

SPECIAL FUNCTIONS

Language
XXXX
44