Sanremo CAFE RACER CR2 Instruction Booklet page 33

try heating the water.
Repeat the same operation with the spout on
the other side of the machine.
- Attach the portafilters (9) to the group heads,
position the cups underneath and perform a few
deliveries, enabling the three brewing settings
using the corresponding buttons (10).
Check correct delivery of water into the cup.
IMPORTANT: We recommend the
following maximum quantities:
• 100 cc maximum continuous
delivery of coffee for each group
• 500 cc maximum continuous
delivery of hot water
• 30 seconds continuous delivery
of steam.
- Check that the pump pressure indicated on the
display (2) after delivery is about 130 PSI.
IMPORTANT: Check that pump
pressure during delivery is
between 8 and 9 bars (116-130
PSI). If pressure is not within
this range, it must be adjusted.
To adjust, contact technical
assistance.
- Turn the machine off by pressing button (1), the
displays go off. Close the water supply tap.
Commissioning
33
CAFÈ RACER
EN