Transport - HE-VA Tip-Roller 4.5 m Operating Instructions, Spare Parts List, Declaration Of Conformity

UK
Raise the support leg and place it in the transport fittings on top of the drawbar. Now fit the four
hydraulic hoses.
The hoses for the tip cylinder are provided with red tie strap.
The hoses for the wing cylinder are provided with blue tie strap.
Important:
Check that the male end mounted by the factory fits the female end of the
quick couplings of the tractor.
Now pressurise the tip cylinder (red) so that the side sections are tipped free of the
transport fittings.
Then the wing cylinder (blue) is pressured so that the wings are turned as much
back as possible.
Now relieve the pressure on the tip cylinder, and the roller will tip forward down
to working position. When the bottom has been reached, let go of the hydraulic
handle and the roller is ready for use.

Transport

At change-over for transport, the roller is tipped totally backward by pressurising the tip cylinder.
Now pressurise the wing cylinder so that the side sections turn forward, towards the stop on the transport
fittings of the drawbar.
When both sides lie in parallel with the drawbar, they are lowered down into the transport fittings by
unpressurising the tip cylinder. Then relieve the pressure on all hydraulic hoses, and the roller is ready for
transport.
INSTRUCTIONS FOR TRANSPORT AT PUBLIC ROADS:
Before transport at public roads, make sure that the attachment of the implement to the tractor, is in accordance
with the local rules and regulations in force
lights and warning signs).
FRONT AXEL LOAD:
When the implement is attached and at maximum load, the tractors driving properties must be ensured.
Check that the front axel is sufficiently loaded. The front axel load must be at least 20% of the tractors
weight. Permitted axel load and total weight for the tractor must be respected.
NB! The driving, controlling and braking properties are affected by the attached implement
Tip Roller 4,5 - 5,4 - 6,3m (excl. 6,3 m w/620mm cambridge)
(permitted total weight, permitted axel load, transport width,
7
Back to the table of contents
01-10-2021