Table of Contents
Advertisement
UK
Tip Roller 4,5 - 5,4 - 6,3m (excl. 6,3 m w/620mm cambridge)
01-10-2021
Description of the machine
The Tip-Roller is a 3-sectioned hydraulic, wheel mounted roller. Tip-Roller is to be used for packing the
top soil, to maintain the content of moisture in it, and to eliminate not solid stones from the surface of the
cultivated area.
The roller sections has an independent suspension. Side sections are center-mounted in an intermediate
joint, connecting the side sections to the wheel frame, which gives the sections a perfect adaption to the
ground in uneven areas. The changing between transport- and work position is by hydraulic force. The
roller has a low and compact transport position with a width of 2,2 or 2,42 meters.
Read the manual before operating the roller and strictly follow the safety instructions.
Delivery Check
Check the roller for any damages. Check the hydraulic hoses for cuts and squeezing damages. Check also
the other hydraulic components, are not damaged during transport.
Check that the frame construction has not been damaged. You should also check that the roller blocks
have not been exposed to impacts, which may have damaged the cast roller rings or the double-sealed ball
bearings.
Finally check that the transport wheels are tightened and OK.
Check the air pressure in the tyres according to Technical Specifications chart next page
Instructions for unloading and final assembly
In order to minimize the roller´s space during transport, the roller is supplied partially separated from the
factory. If the machine is delivered unassembled, it must therefore be completely installed first.
Transport Brackets
At delivery the machine is mounted with brackets for hoisting gear, which
is not painted.
These brackets is for attachment of chains or straps, when loading or
unloading the machine from the transport vehicle, and they must be
dismantled before use.
5
Back to the table of contents
Advertisement
Table of Contents
