Table of Contents
Advertisement
UK
Do not operate the machine, if any people
When persons are at risk in the dangerous area (e.g., when doing adjustments, maintenance or connect or
disconnecting), the following points must be met:
• Lower the machine on solid ground.
• Hydraulic must be relieved.
• Tractor must be turned off, and the key removed.
• Driver must be aware of, when operating that there are no persons at risk in the
dangerous area.
• He-Va cannot be held responsible for any falling accidents due to washing
lubrication and other maintenance tasks
• By the time tires will become tender and explosion danger can occur, when
transporting or when controlling tire pressure
• Drive carefully when going from road to paddock and opposite. Be aware of ditches
along the road and holes in dirt roads because gravity point is reasonable high in
transport position. Especially when additional equipment is mounted
• The machine must not be operated by persons who have not been properly instructed
or trained
Most accidents when operating the machine, transporting, and doing maintenance occurs, when avoiding
the simplest safety regulations.
For this reason, it is of highest importance, that any person who is operating the machine, strictly follows
the safety regulations and other instructions, which belongs the machine.
The machine must only be operated, maintained, and fixed by persons, who is confidential with and
skilled for this work and is aware of moments of danger, which can occur.
ATTENTION!!
Rotating parts and loose in a loose condition, is a dangerous combination.
IMPORTANT!!
It is strictly prohibited for any person to take place on the frame of the
machine, when it is either operating or the tractor is idling.
1
People at risk: Any person, who is completely or partially in the dangerous area.
2
Dangerous area: At the machine and underneath it, and in distance of 4 m from it.
Tip Roller 4,5 - 5,4 - 6,3m (excl. 6,3 m w/620mm cambridge)
Safety for Tip-Roller
1
are at risk in the dangerous area.
10
Back to the table of contents
01-10-2021
2
Advertisement
Table of Contents
