Typical Arrangement - Inside Installation / Dust Application - Bartec SILASPZ Manual

Ex p Control unit
SILAS pz

Typical arrangement - inside installation / dust application

Rev. 0
The following figures show the mounting of the SILASpz control unit with one or
two pressure outputs. The Ex p control unit is mounted inside the Ex p
equipment.
Position Description
(1) Ex p Controller
(2) Mounting kit "Internal"
(3) First pressure switch
(4) Optional second pressure outlet from volume > 700 liters
(5) Adjustable purge gas nozzle
Pressure reducer
(6)
(7) Ex p protected equipment
A1-37S2-7D0001_pz_Manual_Exp-Control-Unit_20210923_0_en.docx
Installation
Page 33 of 88