Parameter; Temperature Sensors - Bartec SILASPZ Manual

Ex p Control unit
SILAS pz

Parameter

Temperature sensors

Rev. 0
Up to three temperature sensors in the PT100 or 1000 version can be connected
to the Ex p control unit.
Parameters
Parameter
Temperature – actual
Temperature switching value 1
Temperature switching value 2
Temperature switching value 3
Switching hysteresis
A1-37S2-7D0001_pz_Manual_Exp-Control-Unit_20210923_0_en.docx
Operation
Within the "Save / Parameters" menu,
parameters from the Ex p control unit
can be saved on a local computer or
transferred from the local computer to
the Ex p control unit.
Upload = Transfer local parameter set
to the Ex p control unit.
Download = Save parameter set from
Ex p control unit to local computer.
In the menu "T. sensors" up to three
PT100/1000 sensors can be
configured.
Various functions can be executed in
the control sequence for the recorded
temperature.
This function can be used e.g. for
monitoring frequency converters.
Function
Displays the measured temperature
The assigned function is executed on
exceeding the switching value
The assigned function is executed on
exceeding the switching value
The assigned function is executed on
exceeding the switching value
The switching hysteresis between
activation and deactivation of the
assigned function
Page 57 of 88