Selecting The Shooting Modes (Scene Files); Types Of Shooting Modes; How To Select The Shooting Mode - Panasonic AW-UE80WP Operating Instructions Manual

Selecting the shooting modes (scene files)

Types of shooting modes

One of four shooting modes (Full Auto, Scene1, Scene2 or Scene3) —
whichever one will best suit the shooting conditions — can be selected.
Select the mode (Scene) that satisfies the shooting conditions and suits
your preferences.
Brightness, Picture, and Matrix settings are also saved for each shooting
mode, and you can change the setting values for each of these with
menu operations.
For details of the factory settings, refer to pages 76 to 82.
[Full Auto]
The exposure settings such as shutter speed, gain, and aperture
plus a few image quality settings are automatically adjusted.
[Scene1]
The settings of your preferences can be established in line with the
shooting scene, lighting and other conditions.
The settings according to the factory settings are suited to shooting
in normal usage environments including bright scenes.
[Scene2]
The settings of your preferences can be established in line with the
shooting scene, lighting and other conditions.
The settings according to the factory settings are suited to shooting
in low-light environments.
[Scene3]
The settings of your preferences can be established in line with the
shooting scene, lighting and other conditions.
The settings according to the factory settings are for manual setting
of shutter speed, gain, aperture, etc.
<NOTE>
• The results of the white balance and other adjustments are stored in
the memory separately by shooting mode. Be absolutely sure to select
the shooting mode before making any adjustments.
• Some of the initial settings are auto settings and cannot be operated
manually. To operate them manually, switch from the auto settings to
the manual settings as required.
• When switching between shooting modes (Full Auto, Scene1, Scene2
or Scene3), and [Serial] or [IP] of [Tracking Data Output] is set to
[On], the tracking data output may be delayed or the value may not be
updated. (→ page 59)

How to select the shooting mode

When performing operations from a wireless
remote control
3, 5, 7
1.
Press the CAMERA <1>, <2>, <3> or <4> button to select
the unit.
2.
Press and hold the <MENU> button for about 2 seconds.
The Top Menu is displayed.
T o p M e n u
C a m e r a
S y s t e m
O u t p u t
P a n / T i l t
P r e s e t
M a i n t e n a n c e
3.
Press the <4> or <5> button to bring the cursor to
[Camera].
4.
Press the <M> button.
The [Camera] menu is displayed on the monitor.
C a m e r a
S c e n e
B r i g h t n e s s
P i c t u r e
M a t r i x
L e n s
R e t u r n
5.
Press the <4> or <5> button to bring the cursor to
[Scene].
33
MENU
2, 8
CAMERA
1
1 2 3 4
SET MODE ON ー OPT ー OFF
OFF LOW HI AUTO
GAIN
1 2 3
4 5 6
PRESET MEMORY
7 8 9
10 11 12
PRESET
HOME
4, 6, 7
LIMIT
FOCUS ZOOM
F u l l A u t o