Panasonic AW-UE80WP Operating Instructions Manual page 163

Specifications (continued)
Electronic shutter speed:
• 59.94p/59.94i mode
1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/8000, 1/10000
• 29.97p mode
1/30, 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/8000, 1/10000
• 23.98p/24p mode
1/24, 1/48, 1/60, 1/100, 1/120, 1/250, 1/500,
1/1000, 1/2000, 1/4000, 1/8000, 1/10000
• 50p/50i mode
1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/8000, 1/10000
• 25p mode
1/25, 1/50, 1/60, 1/100, 1/120, 1/250, 1/500,
1/1000, 1/2000, 1/4000, 1/8000, 1/10000
Synchro scan:
• 59.94p/59.94i mode
60.00 Hz to 7200 Hz
• 29.97p mode
30.00 Hz to 7200 Hz
• 23.98p/24p mode
24.00 Hz to 7200 Hz
• 50p/50i mode
50.00 Hz to 7200 Hz
• 25p mode
25.00 Hz to 7200 Hz
Gamma: Normal/HD/Cinema1/Cinema2/Still Like
White balance: ATW, 3200K, 5600K
AWB: AWB-A/AWB-B
VAR (selectable between 2000K and 15000K by
designating a value)
• ATW Speed variable in 3 steps
Chroma amount variability:
OFF, –99% to 99%
Scene file:
Full Auto, Scene1, Scene2, Scene3
Output format
SDI output:
[HD format]
1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i,
1080/29.97p
*
1080/29.97PsF, 1080/25PsF, 1080/23.98PsF,
1080/24p , 1080/23.98p
1
*
HDMI output:
[4K format]
2160/59.94p, 2160/50p, 2160/29.97p
2160/24p , 2160/23.98p
1
*
[HD format] 1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i,
1080/29.97p
*
1080/24p , 1080/23.98p
1
*
*
1
Native output
* 2
OVER 59.94i output (your monitor may recognize the signal as
59.94i).
* 3
OVER 59.94p output (your monitor may recognize the signal as
59.94p).
, 1080/25p , 1080/23.98p ,
1 1 2
* *
, 720/59.94p, 720/50p
1
*
1 , 2160/25p
*
1
*
, 1080/25p , 1080/23.98p ,
1 1 3
* *
, 720/59.94p, 720/50p
1
*
Synchronization system:
Internal/External synchronization (BBS/Tri-level sync)
[Pan‑tilt head unit]
Installation method:
Stand-alone (Desktop) or suspended (Hanging)
• To ensure safety, the unit must be secured using
the mount bracket supplied.
Camera/pan‑tilt head control:
IP connecting
cable
AW protocol
connecting cable
For the LAN cable, use a category 5e or above, STP (Shielded
4
*
Twisted Pair) and straight cable.
Pan/tilt operation speed:
Speed range: 0.08°/s to 60°/s (Normal mode)
3 speed modes installed
*
Normal: 60°/s, Fast1: 90°/s, Fast2: 180°/s
• Note that the operating noise may be loud in high
speed.
• If the operating noise is disturbing, use the Normal
mode.
Panning range:
±175°
Tilting range:
–30° to 90°
• Depending on the pan or tilt position, the camera
may be reflected in the image.
Quietness: NC25 or less
AC adaptor
„ „
Input : 100 V to 240 V AC (
Output : 12 V DC (
indicates safety information.
1 ,
*
163
• When connecting through a PoE++ hub
LAN cable , max. 100 m (328 ft)
4
*
• When a PoE++ hub is not used
LAN cable , max. 100 m (328 ft)
4
*
LAN cable , max. 1000 m (3280 ft)
4
*
)
, 50/60 Hz, 1.2 A
), 3.0 A, 36 W