Panasonic AW-UE80WP Operating Instructions Manual page 118

Web screen configurations (continued)
Lens setting screen [Lens]
„ „
The setting is confirmed with the [Set] button.
Focus Mode [Manual, Auto]
Select auto or manual mode for the focus adjustment function.
Manual Adjust focus manually.
Auto Always adjust focus automatically.
Factory settings: Auto
AF Sensitivity [Normal, Stable]
Select the conformability mode for auto focusing function.
Normal Focusing is with a standard conformability.
Stable Focusing is with a priority placed on stability.
Factory settings: Normal
Zoom Mode [Opt.Zoom, i.Zoom, D.Zoom]
Set the maximum magnification rate for zoom.
Opt.Zoom Use only optical zoom.
Optical zoom up to 24× is possible.
i.Zoom Enable the i.Zoom function.
When this function is enabled, digital zoom is used while
reducing image degradation.
When [Format] in the [System] screen is 2160/29.97p,
2160/25p, 2160/24p, 2160/23.98p
Up to 28× zoom is possible combining optical zoom and
digital zoom.
• When [Format] in the [System] screen is other than one
of these, up to 36× zoom is possible combining optical
zoom and digital zoom.
D.Zoom Enable the digital zoom function.
Higher digital zoom magnifications will result in coarser
images.
Factory settings: Opt.Zoom
Max Digital Zoom
[×2, ×3, ×4, ×5, ×6, ×7, ×8, ×9, ×10]
Set the maximum digital zoom magnification.
This is only enabled when [Zoom Mode] is set to [D.Zoom].
Factory settings: ×10
<NOTE>
• Higher digital zoom magnifications will result in coarser images.
Digital Extender [Off, ×1.4, ×2.0]
Make settings for the digital extender function.
Off Turn the digital extender function off.
×1.4 The digital zoom will be fixed at 1.4×.
×2.0 The digital zoom will be fixed at 2.0×.
This is only enabled when [Zoom Mode] is set to [Opt.Zoom].
Factory settings: Off
O.I.S. Mode
[Off, O.I.S.(STABLE), O.I.S.(PAN/TILT)]
Sets the mode for optical image stabilization (O.I.S.).
Off Turns the optical image stabilization (O.I.S.) function and
electronic image stabilization (EIS) function Off.
O.I.S. Turns the optical image stabilization (O.I.S.) function and
(STABLE) roll direction electronic image stabilization (EIS) function
On.
Use with a pan/tilt fixed shooting scene.
O.I.S. Turns the optical image stabilization (O.I.S.) function and
(PAN/TILT) roll direction electronic image stabilization (EIS) function
On.
Use with a scene for increasing the image stabilization
effect during a shooting while performing the pan/tilt
operation.
Factory settings: Off
<NOTE>
• In [O.I.S.(STABLE)] mode, the optical image stabilization (O.I.S.)
function's level of correction is reduced during pan/tilt operations in
order to minimize the convergence resulting from image stabilization
during pan/tilt operations.
• In [O.I.S.(PAN/TILT)] mode, as importance is given to heighten the
image stabilization effect during pan/tilt operations, the convergence
resulting from image stabilization during pan/tilt control may be a
cause for concern in some scenes.
Use [O.I.S.(STABLE)] for scenes where the convergence resulting
from image stabilization needs to be restrained.
118