Scene Copy Screen; Initialize Screen - Panasonic AW-UE80WP Operating Instructions Manual

Camera menu items (continued)

Scene Copy screen

S c e n e Copy
S c e n e C o p y
F r o m
T o
E x e c u t e
R e t u r n
Scene Copy
This is selected to copy the various bits of Scene data recorded in the
camera ([Full Auto]/[Scene1]/[Scene2]/[Scene3]) to each other.
From [Full Auto, Scene1, Scene2, Scene3]
Select the Scene to copy data from.
To [Full Auto, Scene1, Scene2, Scene3]
Select the Scene to copy data to.
<NOTE>
• When copying between [Full Auto], and [Scene1] to [Scene3],
some setting values may be changed according to some exclusive
conditions.
• When [From] is [Full Auto], for items that are operating as [Auto],
the operating setting values are applied at the time that the copy is
implemented.
Return
Return to the previous menu level.

Initialize screen

Scen e1
Scen e1
All
All the set values of the OSD menu are restored to the factory
settings.
<NOTE>
The following items are not initialized:
• Network settings
• [AWB] and [ABB] adjustment values
• Information registered in the preset memories
• [Frequency] on the [System 1/2] screen
• [Format] on the [System 1/2] screen
• [Format] of [3G SDI] and [HDMI] on the [Output 1/5] screen
Scene All
From the set values of OSD menu, the set values of all data (Full
Auto, Scene1 to 3) saved as a scene file are restored to the factory
settings.
The data saved as a scene file includes each of the values set on the
screen enclosed within "
(The data not saved as a scene file includes each of the values set on
the screen enclosed within "#" on the OSD menu screen title.)
Full Auto
Scene1
Scene2
Scene3
From the set values of OSD menu, the set values of the specified
scene number (any one from Full Auto, Scene1 to 3) in the data
saved as a scene file are restored to the factory settings.
Return
Return to the previous menu level.
72
I n i t i a l i z e
A l l
S c e n e A l l
F u l l A u t o
S c e n e 1
S c e n e 2
S c e n e 3
R e t u r n
" on the OSD menu screen title.
*