Output 2/5 Screen - Panasonic AW-UE80WP Operating Instructions Manual

Camera menu items (continued)
HDMI
Make the settings for output from the HDMI connector.
Format
Set the output format.
The following format settings are possible depending on the [Format]
setting in the [System 1/2] screen.
Frequency System Format
59.94Hz 2160/59.94p
2160/29.97p
1080/59.94p
1080/59.94i
1080/29.97p
1080/29.97PsF
1080/23.98p(59.94i)
720/59.94p
50Hz 2160/50p
2160/25p
1080/50p
1080/50i
1080/25p
1080/25PsF
720/50p
24Hz 2160/24p
1080/24p
23.98Hz 2160/23.98p
1080/23.98p
1080/23.98PsF
* 1
It denotes "1080/23.98p over 59.94i".
*
2
It denotes "1080/23.98p over 59.94p".
Video Sampling [4:2:2/10bit, 4:2:0/8bit]
When [Format] in [HDMI] is [2160/59.94p] or [2160/50p], select the
video sampling output from the HDMI connector.
4:2:2/10bit Output in 4:2:2/10bit mode.
4:2:0/8bit Output in 4:2:0/8bit mode.
<NOTE>
• When [Format] in [HDMI] is other than [2160/59.94p] or [2160/50p],
[Video Sampling] cannot be changed and is fixed at [4:2:2/10bit].
Return
Return to the previous menu level.
Format (HDMI)
2160/59.94p
1080/59.94p
2160/29.97p
1080/29.97p
1080/59.94p
1080/59.94i
1080/29.97p
1080/29.97p
1 1080/23.98p(59.94p) 2
* *
720/59.94p
2160/50p
1080/50p
2160/25p
1080/25p
1080/50p
1080/50i
1080/25p
1080/25p
720/50p
2160/24p
1080/24p
1080/24p
2160/23.98p
1080/23.98p
1080/23.98p
1080/23.98p

Output 2/5 screen

O u t p u t 2 / 5
B a r
C o l o r B a r T y p e
T o n e
A u d i o
I n p u t T y p e
V o l u m e L e v e l C H 1
V o l u m e L e v e l C H 2
P l u g i n P o w e r
R e t u r n
Bar [Camera, Colorbar]
Switch between camera images and color bars.
Camera Camera images
Colorbar Color bar
Color Bar Type [Type1, Type2]
Select the type of color bar to display.
Type1:
This is only enabled when [Bar] is set to [Colorbar].
Tone [Off, Low, Normal]
Make the settings for the test tone signal (1 kHz) output while the
color bar is displayed.
Off Test tone is not output.
Low Test tone is output at low volume.
Normal Test tone is output at normal volume.
This is only enabled when [Bar] is set to [Colorbar].
Audio [Off, On]
Turn audio input off/on.
Input Type [Mic, Line]
Mic Set the microphone input.
Line Set the line input.
This is only enabled when [Audio] is set to [On].
Volume Level CH1 [–36dB to +12dB]
Set the volume of audio output (CH1).
This is only enabled when [Audio] is set to [On].
Volume Level CH2 [–36dB to +12dB]
Set the volume of audio output (CH2).
This is only enabled when [Audio] is set to [On].
Plugin Power [Off, On]
Turn the plugin power for the audio off/on.
This is only enabled when [Audio] is set to [On].
This is only enabled when [Input Type] is set to [Mic].
Return
Return to the previous menu level.
61
C a m e r a
T y p e 2
N o r m a l
O f f
L i n e
0 d B
0 d B
O f f
Type2: