Panasonic AW-UE80WP Operating Instructions Manual page 65

Camera menu items (continued)
Fall Acceleration [1 to 255]
Sets the deceleration speed for pan/tilt deceleration operation in 255
steps. (The deceleration speed increases as the number increases)
When it is necessary to reduce the speed to the specified speed using
manual control of pan/tilt by lever operation etc. through the controller,
the deceleration process is performed based on the deceleration
speed specified in this setting.
This is enabled only when [P/T Acceleration] is [Manual].
<NOTE>
• The deceleration and stop processes are carried out right up to
the end of the lens mechanism section and in order to prevent
a collision with the mechanism, in the actual operation, [Fall
Acceleration] may be restricted.
Return
Return to the previous menu level.
The relationships between the various setting values during manual operation of pan/tilt when [P/T
„ „
Acceleration] is set to [Manual]
It is possible to specify the responsiveness (maximum speed, acceleration rate, S-curve steps) for operation.
<NOTE>
• When the specified acceleration speed is small, it is not possible to reach the maximum speed of the product.
Acceleration
range
[Rise S‑Curve]
0 to 30
Acceleration time
[Rise Acceleration]
1 to 255
The larger the value, the shorter the
acceleration time
(It takes less time to reach the speed
specified with manual pan/tilt operation)
Range during which the speed reaches the maximum
according to that specified by manual operation of pan/tilt
The larger that the value of the S-curve is, the greater
the speed changes when accelerating or decelerating
(represented by the dotted line rather than the solid line), and
the operational feel of acceleration and deceleration changes.
There is no change in the time taken for accelerating or
decelerating with the S-curve setting.
Time when pan/tilt are manually operated
[Fall S‑Curve]
0 to 30
[Fall Acceleration]
The larger the value, the shorter the
deceleration time
(It takes less time to reach the
deceleration or stopped status specified
with manual pan/tilt operation)
65
Deceleration
range
Maximum speed reached
(Speed specified by manual
operation)
Deceleration
time
1 to 255