Selecting The Camera Unit; Selecting Scene Mode; Scene Mode Type; How To Select The Scene Mode - Panasonic AW-UE4 Series Operating Instructions Manual

Selecting the Camera Unit

When performing the operations using the wireless remote control
Press the [CAM1], [CAM2], [CAM3] or [CAM4] button.
The camera unit's status indicator LED blinks green when a signal matched by the remote control ID has been
received, and it blinks orange when a signal that is not matched by the remote control ID has been received.

Selecting Scene Mode

Scene Mode Type

The unit has three preset scene modes, each of which corresponds to a set of circumstances in which the subject will
be shot.
Select the mode that satisfies the shooting conditions and suits your preferences.
The settings can be changed by menu operations.
The results of the white balance and other adjustments are stored in the memory separately by shooting mode. Be
absolutely sure to select the shooting mode before making any adjustments.
 Full Auto
User can adjust the picture level, AGC MaxGain, slow shutter, Chroma level, and white balance.
 Shutter Priority
User can adjust the picture level, AGC MaxGain, shutter speed, Chroma level, and white balance.
 Manual
User can adjust the shutter speed, Gain, Chroma level, and white balance.

How to select the Scene mode

When performing the operations using the wireless remote control
1 Press the [CAM1], [CAM2], [CAM3] or [CAM4] button to select the unit.
2 Press the [MENU] button for 2 seconds.
The menu is displayed.
3 Press the [▲] or [▼] button to bring the highlight to "CAMERA".
26