Selecting The Scene Mode; Scene Mode Types; How To Select The Scene Mode - Panasonic AW-UE20KP Operating Instruction

Selecting the Camera Unit
When performing the operations using the wireless remote control
Press the [CAMERA 1], [CAMERA 2], [CAMERA 3] or [CAMERA 4] button.
The camera unit's status indicator LED blinks green when a signal matched by the remote control ID has been
received, and it blinks orange when a signal that is not matched by the remote control ID has been received.
When performing the operations using the controller (AW-RP60/AW-RP150).
For details, refer to the operating instructions for the controller.
Network connection with AW-RP60/AW-RP150 requires setup of an initial account. When an initial account is not
setup, AW-RP60/AW-RP150 can detect but cannot control this unit.

Selecting the Scene Mode

Scene Mode Types

The unit has three preset scene modes, each of which corresponds to a set of circumstances in which the subject will
be shot.
Select the mode that satisfies the shooting conditions and suits your preferences.
The settings can be changed by menu operations.
The results of the white balance and other adjustments are stored in the memory separately by shooting mode. Be
absolutely sure to select the shooting mode before making any adjustments.
 Full Auto
Under [Brightness], you can set Picture Level, AGC MaxGain, and Slow Shutter.
 Scene 1/Scene 2
Under [Brightness], you can set Picture Level, Iris Mode, Shutter Mode, Gain, and Frame Mix.

How to select the Scene mode

When performing the operations using the wireless remote control
1 Press the [CAMERA 1], [CAMERA 2], [CAMERA 3] or [CAMERA 4] button to select the unit.
2 Press the [MENU] button for 2 seconds.
The menu is displayed.
3 Press the [▲] or [▼] button to bring the highlight to "CAMERA".
When performing the operations using the controller (AW-RP60/AW-RP150).
For details, refer to the operating instructions for the controller.
39