Table of Contents
Advertisement
Module Configuration
This screen is available only if an I/O board with serial ports is connected.
Serial Port
-
Disabled: If I/O board is not installed.
-
Enabled: If I/O board is installed, this option will be enabled automatically. The optimal
setting for base I/O address is 3F8h and for interrupt request address is IRQ4, see
image below.
COM Port Type
Use this option to set RS-232/422/485 mode for COM1 port on I/O board.
AMI BIOS Setup Utility
PICO512 Pico-ITX Board
45
Advertisement
Table of Contents
Need help?
Do you have a question about the PICO512 and is the answer not in the manual?
Questions and answers