Port Monitor Dialog Box - Kongsberg Simrad CS90 Reference Manual

Functions and dialog boxes
If you have added new hardware, you must also allow the CS90 system to use the new
port(s).. Select under the list of serial ports on the page. First select the
Add I/O Setup
port in the list, then select .
OK
Tip
You can give your new serial port a more descriptive name in the dialog
Serial Port Setup
box.
Related topics
Setting up the interfaces to peripheral devices, page 183
I/O Setup page, page 481
Functions and dialog boxes, page 388
Secondary functions and dialog boxes, page 460

Port Monitor dialog box

Communication with external devices is important for the CS90 system. The
communication between the CS90 system and peripheral devices takes place using
"datagrams". These datagrams are self-contained and independent entities of data
carrying information. When setting up or maintaining the CS90 system, it is always
useful to verify that the communication lines with external devices are operational. The
dialog box allows you to study the communication stream on the chosen
Port Monitor
serial line or local area network (LAN) port.
How to open
To open the dialog box, select a serial or LAN port on the page,
Port Monitor I/O Setup
and select .
Monitor
The page is located in the and dialog boxes. The
I/O Setup Installation Output Installation
dialog box is located on the menu. The dialog box is located on the
Setup Output
menu.
Operation
469
442700/A