Enabling Coordinated Universal Time (Utc) On The Bottom Bar - Kongsberg Simrad CS90 Reference Manual

Simrad CS90 Reference Manual
4 In the list, select the information you want to see on the top bar.
Top Bar
5 Select to save the selected settings and close the dialog box.
OK
Related topics
Operating procedures, page 76
Defining settings related to user preferences and individual customizing, page 147
General page, page 495
Enabling Coordinated Universal Time (UTC) on the bottom
bar
You can set up the CS90 system to show Coordinated Universal Time (UTC). When
disabled, the CS90 system uses local time.
Prerequisites
To enable UTC time, your CS90 system must be set up to accept the NMEA ZDA
datagram. The NMEA ZDA datagram contains the universal time code (UTC), day,
month, year and local time zone.
Context
This is an "on/off" switch. The time is shown on the bottom bar at the bottom of the
display presentation.
Procedure
1 Open the
Display
2 Select
Display Options
Observe that the
3 Select to open the page.
General
4 Select
UTC Time
5 Select to save the selected settings and close the dialog box.
OK
Related topics
Operating procedures, page 76
Defining settings related to user preferences and individual customizing, page 147
General page, page 495
150
menu.
.
dialog box opens.
Display Options
to enable Coordinated Universal Time (UTC).
442700/A