RGBlink FLEXpro 8 Quick Start Manual page 43

Display Area
is to let users to choose which display areas to display on the PGM and allow users to set transition effect for
each display area so that they can switch from PST to PGM in desired effect.
Keep|Swap
Only when separate Display switching is OFF can Keep|Swap work.
Under the Keep status, users need to select a bank and use Cut or Take to switch image from PST to PGM.
Under Swap status, users select a bank, then use Take or Cut to swap this bank and the bank before this one.
Bank Save and Load
Save Bank to Page
Select a bank,click Page,select Page X,the bank is saved in the page.
The page turns green then become grey, indicating the bank is saved in the page.
Load bank from Page
Click Load Page, pages with bank saved are green, select one from them and the selected one becomes red. The
bank is loaded from page to PST.
Script Save and Load
Save Script
Click ,fill in the blank with the name of setting and Save
© Xiamen RGBlink Science & Technology Co., Ltd.
42 / 46
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com