RGBlink FLEXpro 8 Quick Start Manual page 33

Hide thumbs Also See for FLEXpro 8:

Table of Contents

Led cabinet is offered to do cabinet settings.

Module Index: choose the number of the Quatro modules.

Cabinet Type: Customize or Manufacture

Cabinet Type: Manufacturer or Customize

Width, Height: manually filled in if choose cabinet type as Customize

Total Col, Total Row: set numbers of total column and numbers of total row according to

Quadro Res

(maximum capacity of a Subito Quadro Sender card) 1920x1080 and Disply Area shows the total width × total

height. The number cannot show if Display Area exceed the restriction.

Tools:

Delet all, 1:1, Zoom in, Zoom Out, Sort Change

Set each Display Area of each ethernet port

Cabinet Rang: Ethernet

Ethernet:choose port 1 (or, 2,3,4)

Connection type:Standard or customize, choose Standard here

Choose customize if the standard connection cannot apply to field application.

Fill in total row and total column number according to the restriction of single RJ45 Port 655360 pixels.

For example Port 1 control 800x800 on the LED screen as follows:

Go back to cabinet type as Module, the display area just set will show

32 / 46

Ph: +86 592 5771197 |

support@rgblink.com

www.rgblink.com

Table of Contents