RGBlink FLEXpro 8 Quick Start Manual page 34

Use ethernet parameters to adjust position of control area.
Click Ethernet then click Module to refresh
Fill in the X number and Y number and set.
Customize connection :Ctrl+Left Mouse
Adjust Display Area
Drag the boarder of the display area to move its place in the interface.
Click icon to shrink,Click to enlarge the proportion of display area on interface.
Parameters
Set the postion and size of each output display in Parameters or use the bar under the interface and type in the
parameter to set resolution and position of monitor
Swap Port: users can swap two monitors display
Choose port from the drop down arrow list.
© Xiamen RGBlink Science & Technology Co., Ltd.
33 / 46
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com