RGBlink FLEXpro 8 Quick Start Manual page 36

Each monitor (output port) can contain layers no more than 4. Any 1 input signal cross 1 border
of a monitor is regarded as 2 layers.
Layer Adjustment
There are two ways to adjust layer.
1. Use the bar under the interface
Choose one layer and the bar shows its signal source, type in position and size.
2. Layer Scale or Crop
Layer Movement
Place the cursor on the layer, it turns to a palm icon , press the left of mouse, the icon turns to a fist ,
moving the mouse can drag the layer.
Layer Remove
Click the cross on the top right of the layer to remove the layer if needed.
© Xiamen RGBlink Science & Technology Co., Ltd.
35 / 46
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com