Topology Diagram - RGBlink FLEXpro 8 Quick Start Manual

Topology Diagram

XPOSE 2.0 offers the feature of making topology diagram which can assist users to import the actual input and
output connection into XPOSE control.
1. Drag device, input source device and output device from the list on the left based on the field application.
For example, drag Flexpro 8 from Device, Laptop from Input and LDC from Output list as follows:
2. Click the icon at the right bottom corner and open the setting interface as following:
3. After Flexpro 8 is dragged into the topology diagram interface, users can find how many Flexpro 8 devices
currently linked in the same network from the drop-down arrow after SN.
© Xiamen RGBlink Science & Technology Co., Ltd.
12 / 46
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com