Testing Connectivity To The Lan; Led Indicators; Telephone Console Leds - Avaya G650 Installing

Testing the complete configuration

Testing connectivity to the LAN

To test the external IP connections for the C-LAN, IP Media Processor, and VAL circuit packs,
you must ping both the circuit pack and a known computer that is connected to your network. If
everything is configured correctly, the Result column on the Ping Results screen shows PASS.
If the Result column reads ABORT, verify the IP-address information and check the
connectivity, including the cabling.
To test connectivity to the LAN:
1. Type ping ip-address IPaddress board UUCSS, where IPaddress is the IP
address of the circuit pack and UUCSS is the cabinet and slot of the circuit pack.
2. Press Enter.
3. Type ping ip-address IPaddress board UUCSS, where the variable IPaddress is
the IP address of another computer beyond the gateway and UUCSS is the cabinet and slot
of the circuit pack. Press Enter.

LED indicators

To access detailed alarm and LED descriptions, see the maintenance book for your system. If a
maintenance object starts to fail some periodic tests, the media server generates an alarm. The
media server identifies three levels of alarms:
Major alarms. Failures that cause critical degradation of service and require immediate
●
attention.
Minor alarms. Failures that cause some degradation of service, but do not cause a critical
●
portion of the configuration to be inoperable. This condition requires action, but the
consequences of a minor alarm are not immediate. Problems might be impaired service to
a few trunks or stations or interference with one feature across the entire configuration.
Warning alarms. Failures that cause no significant degradation of service or failures in
●
equipment that is external to the configuration. Warning alarms are not reported to the
attendant console or INADS.
Alarms are communicated to users and technicians by entries in the alarm and sys logs and the
lighting of LEDs. The LEDs are located on the attendant console, on all circuit packs, and,
optionally, on customer-designated telephones.

Telephone console LEDs

Telephones and attendant consoles have some alarm LEDs that must be checked.
66 Installing the Avaya G650 Media Gateway