Display - SICK DL100 Pro PROFINET HighFeature Operating Instructions Manual

3.4.2

Display

8021823/19HC/2021-10-15 | SICK
Subject to change without notice
Table 2: LEDs
LED Description
PWR Device status display
For measures,
LED off: No operation
■
LED green: Interference-free operation
■
LED flashes orange: Warning
■
LED flashes red: Error
■
MF1/2 The status (output level) of the MF1 multifunctional input/output and MF2
multifunctional output
LED off
Blue LED
Yellow LED
LED, white
LNK1/LNK2 Connection status (link) Ethernet port 1 and port 2
LED flashes orange: Data exchange active
■
LED green: Connection (link) to the next participant available.
■
LED off: No physical connection to the next participant available. For
■
measures,
BF/SF The status of the PROFINET interface is indicated by two LEDs.
BF
Off
Flashing red
Red
Off or flashes red
The device has a display which provides a range of information. You can also call up
and set parameters using the display.
Symbols for operating modes
The device has two different operating modes, "measured value display" and "menu
display", which are indicated on the display by the symbols RUN and MEN.
see "Troubleshooting", page
MF1
LOW
HIGH
LOW
HIGH
see "Ethernet problems", page
SF
Off
Off
Off
Flashing red
O P E R A T I N G I N S T R U C T I O N S | DL100 Pro PROFINET HighFeature
FUNCTION AND USE
81.
MF2
LOW
LOW
HIGH
HIGH
83.
Description
•
Device is in the
initialization phase
(approx 1.5 s).
•
PROFINET connec‐
tion OK
• Ethernet connection
OK
• PROFINET connec‐
tion is being estab‐
lished.
•
Device not config‐
ured or incorrectly
configured see "Gen‐
eral faults, warn‐
ings, and errors",
page 81.
No Ethernet connection
see "General faults,
warnings, and errors",
page 81.
PROFINET user flashing
test active.
3
15