installation
MANTEL LEG CLEARANCES
TopView
Side opening
of fireplace
NON- COMBUSTIBLE REQUIREMENTS:
*
Non combustible - supplied w/unit
3-7/8"
[98mm]
NOTE: The 9-1/4" x 40-5/8" non combustible material supplied with this unit can be replaced if trying to achieve a clean finish. A large piece of non
combustible material (ie. 4' x 8' x 1/2") can be used to eliminate taped seams on or near unit.
*Optional : Steel stud may be placed below the original steel stud on edge only when appliance is in place for ease of securing non-combustible
material.
|
20
Bellavista® B36XTCE-11 Gas Fireplace
3.5"
6.5"
Allowable mantel leg
projection.
12"
40-5/8"
[1032mm]
No Combustible
Materials in this Area
NO FACING OR
FINISHING MATERIAL
IN THIS AREA
32-7/8"
835mm
9-1/4"
[235mm]
8-3/8"
[213mm]
4-1/8"
[105mm]
See framing dimensions on next page.