Maintenance - ETC F-Drive R12 Series Installation Manual

Maintenance

WARNING:
RISK OF DEATH BY ELECTRIC SHOCK! Failure to disconnect all
power to the system before installation, maintenance, cleaning, or any
other system modification could result in serious injury or death.
AVERTISSEMENT :
RISQUE DE MORT PAR DÉCHARGE ÉLECTRIQUE!
Négliger de débrancher toutes les sources d'alimentation du système avant
l'installation, l'entretien, le nettoyage ou toute autre modification du
système peut causer des blessures graves ou la mort.
De-energize main feed to F-Drive Power Control products and follow
appropriate Lockout/Tagout procedures as mandated by NFPA 70E. It is
important to note that electrical equipment such as breaker panels can
present an arc flash hazard if improperly serviced. This is due to the high
amounts of short-circuit current available on the electrical supply to this
equipment. Any work must comply with OSHA Safe Working Practices.
CAUTION:
RISK OF ELECTRIC SHOCK! Disconnect power before servicing.
ATTENTION :
RISQUE DE CHOC ÉLECTRIQUE! Couper l'alimentation avant
l'entretien.
The R12 can be removed from the equipment rack using the two aluminum 'U' handles.
Chapter 8 41