Chapter 3
Install 48 VDC Power Supplies
The MEAN WELL RKP-1UI rack-mount units are 1U, low-profile power distribution solutions
perfectly suited for providing 48 VDC power to the ETC F-Drive R12.
The MEAN WELL rack-mount unit should only be installed by a qualified electrician or service
technician.
Note:
Each MEAN WELL three-bay frame ships with:
One DB-25 terminator that must be installed in the CN500 port in order for the
•
three-bay frame to power on. See
One RJ45 terminator that must be installed in one of the JK1 ports if you are
•
bussing multiple three-bay frames together. See
page 18.
Three power supply blanks to cover unused power supply module bays. Save these
•
blanks if you are not installing three power supply modules in each three-bay
frame.
ETC Part Number MEAN WELL Model
PS505
PS504
Techincal Information from MEAN WELL
For current technical information, view the RKP-1UI specifications on the MEAN WELL website
at https://www.meanwell.com. The RCP-2000/RKP-1UI Instruction Manual is available at
https://www.meanwell.com/webapp/product/search.aspx?prod=RCP-
2000&pdf=UkNQLTIwMDAsUktQLTFVLUUucGRm&a=4.
Chapter 3
Save these important parts that ship with your MEAN WELL three-bay frame.
MEAN WELL RKP-1UI
MEAN WELL RCP-2000 2000 W power supply module
Final Installation Steps on page 17
Bussing Kit Parts Illustration on
Description
custom RKP-1UI rack-mount unit for ETC
13