Filter Options - ElectrIQ eiQCHFGBSS60 User Manual

CARBON FILTER（OPTIONAL）
Activated carbon filters should be used to trap odours (optional – available from
the same stockist you purchased the hood from) and must be used if the hood is
not vented to the outside.
reference:
eiQCF110 (Carbon Filter Pack of 2 – fits both 60cm and 90cm models)
In order to install the activated carbon filters, the aluminium filter should be
removed first. Press the lock and pull it downward as below:
Put the activated carbon filter onto the end of the motor unit and turn it in anti-
clockwise direction. Repeat the same on the other side (see below)
NOTE:
• Make sure the filter is securely locked. Otherwise, it could loosen and
cause damage to unit.
• When the activated carbon filters are attached, the suction power will be
lowered.
• The charcoal filter cannot be washed or recycled. It should be changed at
three or six months according to the amount of use the hood receives.
Replacements are available from the stockist from whom you purchased the
hood:
eiQCF110 (Carbon Filter Pack of 2 – fits both 60cm and 90cm models)
13