ElectrIQ eiQCHFGBSS60 User Manual page 9

5. Attach the exhaust pipe onto the outlet as shown below, and fix the pipe on the
outlet by cable tie. The adaptor can be used at this stage, if you already have
existing smaller diameter venting in place to connect.
6. Drill 3 holes to accommodate the wall bracket. Screw and tighten the wall
bracket onto the wall with the screws (4mm x 40 mm) and wall plugs provided.
Wall plug
Wall bracket
7． Hang the appliance onto the wall bracket. Also, fix the cooker hood on the
wall by two 4x 30mm screws and wall plugs through the back of the cooker hood.
Screw
(4mm x 40mm)
9