Light Bulb Replacement - ElectrIQ eiQTMS60BL User Manual

LIGHT BULB REPLACEMENT

Your cooker hood is supplied with 4 long life LED light fittings, although these are designed to
have a very long lifespan, should one fail, replacements are available from the supplier of the
hood and the guide below can be followed to replace it.
1. Switch the unit off and make sure it is disconnected from the mains supply.
2. Remove the aluminum grease filter
3. Pull out the LED light carefully, follow the wire from the fitting, and unplug at the
connector.
4. Install the replacement fitting by feeding the connector through the unit, and plugging
back in
5. The replacement bulb should them press into place.
6. The aluminum grease filter can then be refitted.
14