Table of Contents
Advertisement
BULB REPLACEMENT
• The bulb must be replaced by the manufacturer, its service agent or similarly
qualified persons.
• Always switch off the electricity supply before carrying out any operations on the
appliance. When handling bulb, make sure it is completely cool down before any
direct contact to hands.
•
When handling globes hold with a cloth or gloves to ensure perspiration does not
come in contact with the globe as this can reduce the life of the globe.
• Before changing the lights, make sure that the appliance is plugged off.
• Protect against danger when changing lights, such as wearing gloves.
LED LIGHTS:
1. Switch off the appliance and unplug it.
2. Slide the front part of the cooker hood.
3. The al filter should be detached first. Press the lock and pull it downward.
4.
Use screwdriver to unscrew the 2 pcs screws and dismantle the terminal of the light
connecting wire.Then take out off the lamp plate and replace it.
ILCOS D code for this lamp
is: DSS-25/65-S-650/160
– Max wattage: 25 W
– Voltage range: DV12V
– Dimensions:650×160 mm
TECHNICAL SPECIFICATIONS
MODEL
MOTOR POWER
WIDTH
MOTOR AIR FLOW
EIQ90CANGW EIQ90CANGBL
1*190W
900mm
630m3/h
9
Advertisement
Table of Contents
