Wiring & Connections; Electrical Codes And Warnings - Copley Controls Accelnet Plus BEL Series User Manual

Accelnet & Stepnet Plus Panels User Guide
5 W & C
IRING
5.1 E
LECTRICAL
Be sure that all wiring complies with the National Electrical Code (NEC) or its national equivalent,
and all prevailing local codes.
DANGER: HAZARDOUS VOLTAGES.
Exercise caution when installing and adjusting. Persons responsible for installing and commissioning Accelnet Plus
servo drives and Stepnet Plus stepper drives must be experienced in all aspects of electrical equipment installations.
DANGER
FAILURE TO HEED THIS WARNING CAN CAUSE EQUIPMENT DAMAGE, INJURY, OR DEATH.
RISK OF ELECTRIC SHOCK.
DC Supplies used to power Accelnet and Stepnet Plus Panel drives must be transformer-isolated and provide
reinforced insulation from AC mains power.
DANGER
FAILURE TO HEED THIS WARNING CAN CAUSE EQUIPMENT DAMAGE, INJURY, OR DEATH.
USE EQUIPMENT AS DESCRIBED.
Operate drives within the specifications provided in this manual.
FAILURE TO HEED THIS WARNING CAN CAUSE EQUIPMENT DAMAGE, INJURY, OR DEATH.
DANGER
REFER TO THE ACCELNET & STEPNET PLUS PANELS STO MANUAL
The information provided in the Accelnet & Stepnet Plus Panels STO Manual must be considered
for any application using the STO feature.
DANGER
FAILURE TO HEED THIS WARNING CAN CAUSE EQUIPMENT DAMAGE, INJURY, OR DEATH.
DO NOT PLUG OR UNPLUG CONNECTORS WITH POWER APPLIED.
The connecting or disconnecting of cables while the drive has HVAUX and/or HV DC power applied is
not recommended.
WARNING
FAILURE TO HEED THIS WARNING MAY CAUSE EQUIPMENT DAMAGE.
A LINE FILTER IS REQUIRED TO MEET CONDUCTED EMISSIONS REQUIREMENTS.
An EMI line filter is required to reduce conducted emissions from the +HV input to source DC supply
FAILURE TO HEED THIS WARNING CAN CAUSE RADIO FREQUENCY INTERFERENCE
WARNING
ONNECTIONS
C W
ODES AND ARNINGS
16-01339 Rev 07