Accelnet & Stepnet Plus Panels User Guide
The drive shown above is a BE2, but the heatsink mounting procedure is the same for all models.
4.18 M
ECHANICAL AND
BEL/BPL/BML
Size
Weight
Driver
Heat Sink
Driver + Heatsink
Ambient Temperature
Storage
Operating
Humidity
Vibration
Shock
Contaminants
Ingress Protection
Environment
Cover Material
Cooling
E
NVIRONMENTAL
5.08 x 3.41 x 1.99 in [129 x 86.6 x 50.4 mm] with no heatsink
5.08 x 3.41 x 3.39 in [129 x 86.6 x 86 mm] heatsink
0.75 lb [0.34 kg]
0.95 lb [0.43 kg]
1.70 lb [0.77 kg]
-40 to +85 C [-40 to +185 F]
0 to +45°C [+32 to +113 F]
0% to 95%, non-condensing
2 g peak, 10~500 Hz (sine), IEC60068-2-6
10 g, 10 ms, half-sine pulse, IEC60068-2-27
Pollution degree 2
IP20
IEC68-2: 1990
Meets U.L. Spec 94 V-0 Flammability Rating
Heat sink and/or forced air cooling required for continuous power output
16-01339 Rev 07
Need help?
Do you have a question about the Accelnet Plus BEL Series and is the answer not in the manual?