Installation Of Base (Mobile Stand) - Labomed Prima DNT User Manual

17A. INSTALLATION OF BASE (MOBILE STAND)
1. Open the center support assembly box as
shown in fig.30.
2. Remove the tool kit and foam sheets as
shown in fig.31.
3. Lift up the Centre Support assembly as shown
in fig.32.
4. Place the Centre Support assembly on the
floor as shown in fig.33.
5. Open the Wheel Support assembly boxes as
shown in fig.34.
6. Remove the foam sheets as shown in fig.35.
6137000-795 Prima
Prima
Fig.30
Fig.31
Fig.32
Fig.33
Fig.34
Fig.35
40
Issue 1.9
Printed on Sept,2021