Unpacking & Installation - Labomed eVO 350 User Manual

SETUP (continued)
UNPACKING AND INSTALLATION
1. Open the outside shipping box and remove the
three (3) inner boxes.
2. Remove the User's Guide and follow it for Slit lamp
installation.
3. Open the box marked as ''Platform Assembly''
and take out the table top and power supply bracket
(shown as "A") in fig. 1.
4. Open the box marked as ''Chin Rest assembly'' and
take out the complete chin rest assembly as
shown in fig. 2.
5. Assemble chin rest assembly to table top using
(6) Allen screws of M3, securing with help of Allen
wrench 2.5mm. refer fig. 3.
8126300-795
Figure-1 Table Top and Power Supply Bracket
eVO 350
Figure-2 Chin Rest Assembly
M 3 Screws
6 Nos.
Figure -3 Chin Rest Attaching Screws
Issue 1.2
Printed on June,2020
eVO 350
A
9