Table of Contents
Advertisement
CARE AND MAINTENANCE(C
CARE INSTRUCTIONS
1. Keep accessories away from dust when not in use, e.g. protect them from dust cover.
2. Remove dust with a pneumatic rubber blower and soft rush.
3. Protect your microscope from moisture, fumes, acids and cosmetic materials. Do not store chemicals
close to the instrument.
4. Protect it from improper handling. Never install other deviced sockets or unscrew optical system and
mechanical parts unless explicitly instructed to do so in this manual.
5. Protect the microscope from oil and grease. Never oil or grease the guide surfaces or mechanical
parts.
6. Remove coarse contamination using a damp disposable cloth.
7. Use disinfectants based on the following ingredients: aldehyde's, alcohols, quaternary ammonium
compounds.
8. Use special optics cleaning cloths and pure alcohol for cleaning lenses and eyepieces.
9. Clean optical components using a lint-free cloth.Soak the cloth using a little methanol or glass cleaner.
Do not use ethanol and spirit.
10. Do not clean products and optical components in a cleaning/disinfecting devices or ultra sound bath.
11. LABOMED MaxiLite coatings are fungal resistant. If you clean as described above, the coatings will
not be damaged.
12. If cleaning and disinfection is done as described above there is no impact of multiple cleaning/
Disinfection on mechanical and optical parts. Paints & Coating are rigid and life long.
TROPICAL ENVIRONMENT/FUNGUS:
LABOMED employs certain safety precaution in its manufacturing techniques an and materials. other
preventive measures include:
•
Keep optical parts clean.
•
Use and store them in a clean, cool and dry environment only.
•
Keep moisture away using silica gel and cover with a plastic cover.
OCCUPATIONAL SAFETY AND HEALTH PROTECTION:
Observe work safety and health protection of persons responsible for processing contaminated
Products.
Current regulation of hospital hygiene and prevention of infection must be observed in the
Preparation, cleaning and disinfection of the products.
INSTRUCTION WORKPLACE
Remove surface contamination with a paper towel.
6137000-795
ontinued)
Prima
Prima
56
Issue 1.9
Printed on Sept,2021
Advertisement
Table of Contents
