20. INSTRUCTIONS FOR USING THE MICROSCOPE
WARNING:
SETTING UP OF MICROSCOPE:
1. Lock all the brakes on base wheels after setting
up of microscope on the attendance area for
stability.
2. Although tension on microscope is factory
pre-set as per the ordered configuration. Still
user can adjust up and down force by tuning
the allen screw clockwise or anticlockwise
with the help of a 8mm allen wrench. Refer
section 14 for more details. Refer Fig.-55 to see
the exact location of tension adjusting screw.
3. Lock the up & Down movement of suspension arm
using locking knob (B) in fig.50 after focusing of
the area of interest.
4. Adjust the eye distance as per IPD scale according
to your convenience.
5. The illumination is controlled through the
control knob (A), fig.55. Rotate it clockwise
or anticlockwise to achieve desired illumination
level.
SETTING UP OF MAGNIFICATION
(Ref. Fig. 56)
1. Adjust to highest magnification with one of
the rotating knobs (56a) provided at magnifica-
tion changer.
2. Fine focusing is done through fine focus knob
or foot paddle.
3. Absolute centering of focused area in field of
view can be done by manual handles (56b).
4. Make sure that the magnification changer is
engaged in the index point at the click stop
position.
6137000-795
INSTRUMENT IS UNSAFE FOR MRI ENVIRONMENT.
Tension
adjustment screw
Prima
(A)
Fig. 55
56a
56b
Fig. 56
Issue 1.9
Printed on Sept,2021
Prima
48