Gpio - Vecow EIC-1000 User Manual

4.3 GPIO

4.3.1 GPIO List
Position
PIN 1
PIN 2
PIN 3
PIN 4
PIN 5
PIN 6
PIN 7
PIN 8
PIN 9
PIN 10
4.3.2 GPIOs control method
You can write or read value by The GPIOs with the Linux command echo/cat by
debug port.
For Android, please use the following adb.exe command.
©Vecow EIC-1000 User Manual
PIN name
DIN2 /sys/class/gpio/gpio76/value
DOUT2 /sys/class/gpio/gpio69/value
DIN0 /sys/class/gpio/gpio74/value
DOUT1 /sys/class/gpio/gpio68/value
DIN1 /sys/class/gpio/gpio73/value
DOUT3 /sys/class/gpio/gpio67/value
DIN3 /sys/class/gpio/gpio70/value
DOUT0 /sys/class/gpio/gpio66/value
Ground
3.3V
Linux node/Note
Power supply
Direction
In
Out
In
Out
In
Out
In
Out
Out
SOFTWARE SETUP 39