Vecow EIC-1000 User Manual page 19

2.2.7 Ethernet Port
There is one 8-pin RJ-45 jack supporting 10/100/1000 Mbps Ethernet connections
in the front side. Plugged in suitable RJ-45 cable, this port can create Ethernet
connection from the system to any other devices, such as a computer, a hub or a
switch. The pin-outs of LAN 1 and LAN 2 are listed as follows :
Pin No.
1
2
3
4
5
6
7
8
The LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection.
The LED indicator on the left bottom corner lightens in solid red when the cable
is properly connected to a 10/100 Mbps Ethernet network; The LED indicator
on the left bottom corner lightens in solid green when the cable is properly
connected to a 1000Mbps Ethernet network; The right LED will keep twinkling/
off when Ethernet data packets are being transmitted/received.
LED Location
Left
Right
©Vecow EIC-1000 User Manual
10/100 Mbps
E_TX+
E_TX-
E_RX+
-----
-----
E_RX-
-----
-----
LED Color 10/100 Mbps
Red/Green Solid Red
Green Twinkling Green Twinkling Green
1000Mbps
MDI0_P
MDI0_N
MDI1_P
MDI2_P
MDI2_N
MDI1_N
MDI3_P
MDI3_N
1000Mbps
Solid Green
GETTING TO KNOW YOUR EIC-1000
1 8
12