Intel core i7/i5/i3 soc whiskey lake ultra-compact fanless embedded system, 2 gige lan, 4 10g usb 3.1 gen 2, 2 com, 9v to 48v, ignition control, -40 degrees c to 85 degrees c (109 pages)
Summary of Contents for Vecow RMS-1000
Page 1
USER USER RMS-1000 Manual Manual Intel ® Core™ i7/i5/i3 SoC (Whiskey Lake) 1U Rackmount Fanless Computing System, 8 GigE LAN w/6 X-coded M12, 4 10G USB, Ignition Control, -40°C to 70°C 1.0.0 Edition 20200203...
Page 3
This manual is released by Vecow Co., Ltd. for reference purpose only. All product offerings and specifications are subject to change without prior notice. It does not represent commitment of Vecow Co., Ltd. Vecow shall not be liable for direct, indirect, special, incidental, or consequential damages arising out of the use of the product or documentation or any infringements upon the rights of third parties, which may result from such use.
1.3.2 Specifications of RMS-1100 1.4 Supported CPU List 1.5 Mechanical Dimension 1.5.1 RMS-1000 Mechanical Drawing 1.5.2 RMS-1100 Mechanical Drawing CHAPTER 2 GETTING TO KNOW YOUR RMS-1000 2.1 Packing List 2.2 Front Panel I/O & Functions 2.3 Ignition Control CHAPTER 3 SYSTEM SETUP 3.1 How to Open Your RMS-1000/RMS-1100...
2 Mini PCIe sockets for PCIe/USB/SIM socket/Optional mSATA expansion, 1 SIM card socket for 5G/WiFi/4G/3G/LTE/GPRS/UMTS, 2 SATA III, 9V to 48 wide range power input (RMS-1000) and 16V to 160V wide range power input (RMS-1100), ignition power control, fanless -40°C to 70°C operating temperature, smart manageability features, RMS-1000 is your trusted rackmount engine.
• 8-port 10/100/1000 Base-T GigE LAN with 6 X-coded M12 connections, iAMT 12.0 supported • 9V to 48V Wide range DC Power Input (RMS-1000) • 16V to 160V Wide range DC Power Input (RMS-1100) • 4 10G USB 3.1 Gen 2, 2 COM RS-232/422/485 •...
GETTING TO KNOW YOUR RMS-1000 2.1 Packing List Item Description RMS-1000/RMS-1100 Embedded System Driver/User Manual DVD Item Description Outlook Usage HANDLE for For HANDLE 53-4001442-203 Ear for 1U For HANDLE 62-03P0396-000 Flat head For HANDLE 53-M000050-012 M3*8L Ni+Ny Flat head...
System power status (on/off) 2.2.1.2 SSD/HDD Tray Off | On DC-IN There are 2 front-access 2.5" SSD/HDD trays in the front side of RMS-1000. Just trigger to open the SSD/HDD tray, up to 4TB is available. 2.2.1.3 DisplayPort Off | On...
Page 18
There are 4 USB 3.1 Gen2 connections available supporting up to 10GB per second data rate in the top side of RMS-1000. They are also compliant with the requirements of SuperSpeed (SS), high speed (HS), full speed (FS) and low speed (LS).
Page 19
LAN 1 and LAN 2 work in normal status, basic iAMT function is enabled. Using suitable RJ-45 cable, you can connect RMS-1000 system to a computer or to any other devices with Ethernet connection, for example, a hub or a switch. Moreover, both LAN 1 and LAN 2 supports Wake on LAN and Pre-boot functions.
Page 20
When both work in normal status, basic iAMT function is enabled. Using suitable M12 LAN cable, you can connect RMS-1000 system to a computer or to any other devices with Ethernet connection, for example, a hub or a switch.
The built-in MCU monitors the ignition signal and turns on/off the system according to pre-defined on/off delay period. 2.3.1 Adjust Ignition Control Modes RMS-1000 series provides 16 modes of different power on/off delay periods adjustable via SW3 switch. The default rotary switch is set to 0 in ATX/AT power mode.
Page 23
Note : 1. DC power source and IGN share the same ground. 2. RMS-1000 supports 9V to 48V wide range DC power input in ATX/AT mode. In Ignition mode, the input voltage is fixed to 12V/24V for car battery scenario.
Page 55
APPENDIX A : Isolated DIO Guide A.1 Function Description The RMS-1000 offers a 16-bit DIO (Isolated/Non-Isolated) 20-pin terminal block connector, and a watchdog timer. DIO definition is shown below : Non-Isolated DIO Non-Isolated DIO Pin No. Pin No. JDIO2 Definition...