Usb Debug Bridge - Vecow EIC-1000 User Manual

4.2 USB Debug Bridge

4.2.1 Android Debug Bridge (ADB)
The EIC-1000 USB 3.0 port is set as host mode in default. To use the ADB
function, the USB 3.0 port must be set to device mode by following steps.
Step 1 Enter Settings and select "About Tablet".
Step 2 Click in the "Build number" in the dialog as shown. A countdown message
will pop up. Keep clicking the click until the number counts to zero.
©Vecow EIC-1000 User Manual SOFTWARE SETUP 33