This manual is released by Vecow Co., Ltd. for reference purpose only. All product offerings and specifications are subject to change without prior notice. It does not represent commitment of Vecow Co., Ltd. Vecow shall not be liable for direct, indirect, special, incidental, or consequential damages arising out of the use of the product or documentation or any infringements upon the rights of third parties, which may result from such use.
Page 4
Order Information Part Number Description ® ® ECS-9755, Quad Core Intel Xeon E3-1505M v5, NVIDIA ® ECS-9755-505M- GeForce GTX 950, 6 GigE LAN w/4 PoE , 2 10G RJ45, 2 GTX950 SSD Tray, 6 USB 3.0, 4 COM, 4 SIM, 32 Isolated DIO (ECC supported) ®...
Page 5
Order Accessories Part Number Description DDR4 16G Certified DDR4 16GB 2133MHz RAM DDR4 8G Certified DDR4 8GB 2133MHz RAM DDR4 4G Certified DDR4 4GB 2133MHz RAM PWA-280WB-WT 280W, 24V, 85V AC to 264V AC Power Adapter with 3-pin Terminal Block (7.62mm pitch), Wide Temperature -30°C to +70°C PWA-160WB-WT 160W, 24V, 85V AC to 264V AC Power Adapter with 3-pin...
Table of Contents CHAPTER 1 GENERAL INTRODUCTION 1.1 Overview 1.2 Features 1.3 Product Specification 1.3.1 Specifications of ECS-9755 GTX950 1.3.2 Specifications of ECS-9655 GTX950 1.4 Supported CPU List 1.5 Mechanical Dimension 1.5.1 Dimensions of ECS-9755 GTX950 1.5.2 Dimensions of ECS-9655 GTX950 CHAPTER 2 GETTING TO KNOW YOUR ECS-9755/9655 GTX950 2.1 Packing List...
Page 7
CHAPTER 4 BIOS SETUP 4.1 Entering BIOS SETUP 4.2 Main 4.3 Advanced 4.4 Chipset 4.5 Security 4.6 Boot 4.7 Save & Exit APPENDIX A : Isolated DIO Guide APPENDIX B : Software Functions APPENDIX C : RAID Installation Guide APPENDIX D : Power Consumption APPENDIX E : Supported Memory &...
Multiple 10 GigE (10Gbps), SATA III (6Gbps), USB 3.0 (5Gbps), PoE (1Gbps) LAN and wireless connections make high-speed data conveying possible. Vecow ECS-9755/9655 GTX950 Series 10 GigE GPU Computing System brings you outstanding workstation-grade system performance for demanding workloads in mission critical real-time embedded applications.
Page 12
I/O Interface Serial 4 COM RS-232/422/485 with auto flow control (ESD 8KV) • 6 USB 3.0 (External) • 1 USB 2.0 (Internal) Isolated DIO 16 Isolated DIO (8 DI, 8 DO) Power, HDD, Wireless SIM Card 4 SIM Card Socket (3 External, 1 Internal) Expansion Mini PCIe 4 Mini PCIe Socket :...
1.4 Supported CPU List Processor No. Cache Max. Frequency Embedded ® Xeon E3-1575M v5 Up to 3.00 GHz ® Xeon E3-1545M v5 Up to 2.90 GHz ® Xeon E3-1535M v5 Up to 2.80 GHz ® Xeon E3-1515M v5 Up to 2.80 GHz ®...
SSD/HDD and DDR4 SO-DIMM. Please verify these items if necessary.) ECS-9755 GTX950 Accessory box, which contains ● Vecow Drivers & Utilities DVD ● Wall-mounting bracket ● KHS#6-32x6 screw for wall-mounting bracket ● M2.5x6 screw for Mini PCIe Slot ●...
2.2 Front Panel I/O & Functions In Vecow ECS-9755/9655 GTX950 series family, all I/O connectors are located on the front panel and the rear panel. Most of the general connections to computer device, such as dual 10GigE LAN, USB, LAN Jack, Audio, VGA, Display, DVI-D and other additional storage, are placed on the front panel.
To power on ECS-9755/9655 GTX950, please press the power button and then the blue LED is lightened. To power off the system, you can either command shutdown by OS operation, or just simply press the power button. If system error, you can just press the power button for 4 seconds to shut down the machine directly.
Page 20
HDD LED/ Yellow : A Hard Disk/ CFast LED. If the LED is on, it indicates that ECS-9755/9655 GTX950 storage is functional. If it is off, it indicates that the system’s storage is not functional. If it is flashing, it indicates data access activities.
Page 22
2.2.8 DisplayPort SIM 1 SIM 3 DVI-D LAN 1 SIM 2 WLAN CFast LAN 2 Onboard Display Port supports auxiliary channel dual mode and the connection supports up to 4096 x 2304 resolution at 60 Hz. Multi-Stream Transport Display Resolutions Table as follows: Multi-Stream Transport Display Max.
Pin No. 10/ 100Mbps 1000Mbps Pin No. 10/ 100Mbps 1000Mbps E_TX+ MDI0_P ----- MDI2_N E_TX- MDI0_N E_RX- MDI1_N E_RX+ MDI1_P ----- MDI3_P ---- MDI2_P ------ MDI3_N Each LAN port is supported by standard RJ-45 connector with LED indicators to present Active/Link/Speed status of the connection. The LED indicator on the right bottom corner lightens in solid green when the cable is properly connected to a 100 Mbps Ethernet network, and it lightens in solid orange when the cable is properly connected to a 1000Mbps Ethernet network.
2.2.14 SSD/HDD Tray SIM 1 SIM 3 DVI-D LAN 1 SIM 2 WLAN CFast LAN 2 HDD 1 HDD 2 There are 2 front-access 2.5’’ SSD/HDD trays in the front side of ECS-9755/9655 GTX950. Just trigger to open the SSD/HDD tray, up to 8TB is available. HDD Tray MB Connector MB Power Connector...
2.3.3 COM Ports DIO 2 DIO 1 DC-IN Isolated Isolated LAN6 LAN5 LAN4 LAN3 COM 2 PIN 1 ~ 8 PIN 11 ~ 18 PIN 1 ~ 8 PIN 11 ~ 18 On | Off COM 1 COM 4 COM 3 DVI-I HDMI Serial port 1 to 4 (COM 1 to 4) can be configured for RS-232, RS-422, or RS-...
Page 32
2.3.6 Isolated DIO DIO 2 DIO 1 DC-IN Isolated Isolated LAN6 LAN5 LAN4 LAN3 COM 2 PIN 1 ~ 8 PIN 11 ~ 18 PIN 1 ~ 8 PIN 11 ~ 18 On | Off COM 1 COM 4 COM 3 DVI-I HDMI There is a 32-bit (16-bit DI, 16-bit DO) with 2 DIO connectors in the rear side.
Page 36
2.4.2 UPS Power Connector For UPS module optional, we use 4.2mm 2x2p power connector. This system has a UPS power input connector for optional part UPS module. CN36 Pin No. Definition Pin No. Definition Ground Ground +VDC_IN +VDC_IN (10~36V, Max.8A) (10~36V, Max.8A) 2.4.3 Miscellaneous Pin Header 2.0mm 2x4p header...
Page 38
2.4.5 BIOS Socket If the BIOS needs to be changed, please contact the Vecow RMA service team. 2.4.6 SATA Connector Standard 7 PIN SATA Connector There are 4 onboard high performance Serial ATA III. It supports higher storage capacity with less cabling effort and smaller required space. SATA4 is only for BOM option.
Page 40
CN20 Pin No. Definition Pin No. Definition USB +VCC (+V5/Max. 0.5A) DATA- DATA+ Ground 2.4.9 SUMIT A, SUMIT B (Dual 10GigE LAN) This system has standard SUMIT A and SUMIT B for SUMIT type add on cards. ECS-9755/9655 GTX950 already had implemented it for 2 10GigE LAN. SUMITB SUMITA GETTING TO KNOW YOUR ECS-9755/9655 GTX950...
Page 45
Panasonic BR2032 190mAh lithium battery. It is recommended that you do not have to get the lithium battery on your own. If the battery needs to be changed, please contact the Vecow RMA service team. 2.4.12 FAN Header Fan power connector supports for additional thermal requirements.
Page 46
2.4.13 LPC Port 80 Header ECS-9755/9655 GTX950 provides a LPC Port 80 header for debug card. Pin out: Pin No. Function Pin No. Function SERIRQ LFRAME# +3.3V LAD0 RESET# Ground LAD1 CLOCK LAD2 Ground 2.4.14 LAN IEEE 1588 Header ECS-9755/9655 GTX950 provides a LAN header for IEEE 1588. LAN No.
Page 48
2.4.15 COM Port Header ECS-9755/9655 GTX950 provides 4 COM port headers for internal COM port cables. CN27 CN28 Pin out: CN27: CN28: Pin No. Description Port Pin No. Description Port Ground_Frame COM3 Ground_Frame COM4 Ground COM3 Ground COM4 COM3 COM4 COM3 COM4 COM3...
Page 50
You may configure your card to match the needs of your application by DIP switch as shown below (the deep switch on and off) 1 : OFF 1 : ON 1 : ON 2 : OFF 2 : OFF 2 : ON 2.5.2 USB Power Jumper Jumper Setting...
Page 52
2.5.4 COM Port RS-422/RS-485 Receiver Terminator COM RS-422/485 COM / DIP Switch ON / OFF Receiver Terminator *Enable COM1 / SW3-1 Disable COM RS-422/485 COM / DIP Switch ON / OFF Receiver Terminator *Enable COM2 / SW3-2 Disable COM RS-422/485 COM / DIP Switch ON / OFF Receiver Terminator...
2.6 Ignition Control ECS-9755/9655 GTX950 series provides ignition power control feature for in- vehicle applications. The built-in MCU monitors the ignition signal and turns on/ off the system according to pre-defined on/off delay periods. 2.6.1 Adjust Ignition Control Modes ECS-9755/9655 GTX950 series provides 16 modes of different power on/off delay periods adjustable via SW5 switch.
Page 56
2.6.2 Ignition Control Wiring To activate ignition control, you need to provide IGN signal via the 3-pin pluggable terminal block located in the back panel. Please find below the general wiring configuration. Pin No. Definition Ignition (IGN) External Power S/W + External Power S/W + For testing purpose, you can refer to the picture above to simulate ignition signal input controlled by a latching switch.
SYSTEM SETUP 3.1 How to Open Your ECS-9755/9655 GTX950 Step 1 Remove the hole plug. Step 2 Remove four F#6-32 screws on the bottom side. HARDWARE INSTALLATION...
3.5 Installing SIM Card Step 1 Remove 2 pcs F-M3x4 screws on CFast & SIM Card. Step 2 Before Inserting CFast & SIM Card, make sure ECS-9755/9655 GTX950 power is not plugged. Step 3 Insert CFast card and push to lock. Step 4 Insert SIM card and push to lock.
Page 70
Step 3 Fasten four KHS#6-32 screws and then finish. Step 4 Finish. Step 5 VESA size have 75x75mm(red) and 100x100mm(yellow). HARDWARE INSTALLATION...
4.2 Main Figure 4-2: BIOS Main Menu The main menu displays BIOS version and system information. There are two options on Main menu. System Date Set the date. Use <Tab> to switch between date elements. System Time Set the time. Use <Tab> to switch between time elements. 4.3 Advanced Figure 4 3: BIOS Advanced Menu Select advanced tab to enter advanced BIOS setup options, such as CPU...
4.3.3 AMT Configuration Figure 4 3-3: Intel AMT Settings Intel AMT Enables/disables Intel (R) Active Management Technology BIOS extension. Note: iAMT H/W is always enabled. This option just controls the BIOS extension execution. If enabled, this requires additional firmware in the SPI device. 4.3.4 PCH-FW Configuration Figure 4 3-4: PCH-FW Settings ME Unconfig on RTC Clear State...
4.3.7 Hardware Monitor Figure 4 3-7: Hardware Monitor Settings The IT8786 SIO features an enhanced hardware monitor providing thermal, fan speed, and system voltages' status monitoring. 4.3.8 Serial Port Console Redirection Figure 4 3-8: Serial Port Console Redirection Settings Console Redirection Console redirection enable or disable.
CPU C state Enable or disable CPU C states. Enhanced C-states Enable/disable C1E. When enabled, CPU will switch to minimum speed when all cores enter C-State. Package C State limit Package C State limit. Intel TXT(LT) Support Enables or disables Intel (R) TXT (LT) support. 4.3.10 Intel TXT Information Figure 4 3-10: Intel TXT Information Display Intel TXT information.
Page 82
4.3.13 CSM Configuration Figure 4 3-13: CSM Settings CSM Support Enable/disable CSM support GateA20 Active UPON REQUEST - GA20 can be disabled using BIOS services. ALWAYS - do not allow GA20 to be disabled; this option is useful when any RT code is executed above 1MB.
Page 86
4.4.3 PEG Port Configuration (SA) Figure 4-4-3: PEG Port Configuration PEG port options for PCIe device. 4.4.4 Memory Information of System Agent (SA) Figure 4-4-4: Memory Information Displays memory information. 4.4.5 PCH-IO Configuration Figure 4-4-5: PCH-IO Settings BIOS AND DRIVER SETTING...
4.6 Boot Figure 4-6: BIOS Boot Menu Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. Bootup NumLock State Select the keyboard NumLock state. Quiet Boot Enables or disables Quiet Boot option. Boot Option Sets the system boot order.
Page 94
A.3 DIO Signal Circuit DI reference circuit: Sink Mode (NPN) Power DIO Connector Supply DI_COM (Pin 9) 6-48V DC DI (Pin1-8) Source Mode (PNP) Power DIO Connector Supply DI_COM (Pin 9) 6-48V DC DI (Pin1-8) DO reference circuit: Sink Mode Device DIO Connector (NPN, Default)
APPENDIX B : Software Functions B.1 IOMem.Dll API The basic functions of Kernel Access for DIO, WDT & POE. int Outp(unsigned long Port, unsigned char Value); Description: Set Byte-Data to Port. Return: if success return 1; else return 0. unsigned char Inp(unsigned int Port); Description: Get Byte-Data from Port.
APPENDIX C : RAID Installation Guide C.1 SATA Mode for RAID Please select SATA device to RAID mode on BIOS menu. Advanced → SATA Configuration → SATA Mode Selection C.2 OS Installation ECS-9755/9655 GTX950 is featured with eight SATA, option 1: include four internal SATA, three mSATA and one CFast.
Page 102
C.7 Disk Management : Partition the Disk After RAID 1 volume created, you can see the figure of SATA device allocation. You will find “Volume_0000” in SATA device at BIOS menu. To start Disk Management tool, select "initialize disk." Then add “Logical Device” for Windows access. C.8 If One SATA HDD on RAID Volume is Out-of-use After RAID 1 volume created, you can see the figure of SATA device allocation.
APPENDIX D : Power Consumption Testing Board ECS-9755 GTX950 16GB X 2 USB-1 USB Keyboard Logitech K120 USB-2 USB Mouse Microsoft 1113 USB-3 USB Flash ADATA 3.0 8GB USB-4 USB Flash ADATA 3.0 8GB CFAST Innodisk CFast 3ME 32GB SATA 0 Intel SATA 540S 18GB SATA 0 Seagate HDD 160GB...