Manual Presentation Scanning - Datalogic MATRIX 450 Reference Manual

INTRODUCTION

2.8.7 Manual Presentation Scanning

In Manual Material Handling
applications,
presentation scanning is more
and more the preferred method
for item identification obtaining
maximum productivity
operational efficiency: while the
stationary overhead
continuously scans the working
area, the operator can easily and
quickly handle objects of various
dimensions and weights, since
no point-and-shot is required for
scanning. No extra tools or
infrastructure is necessary in the
working area; no extra operations
for part identification other than
passing the object through the
scanning zone. No training is
required for users.
The large coverage area and
fast acquisition rate
Matrix450™ – permits rapidly
handling objects in sequence
with great tolerance.
White illumination and continuous high power mode enable top performance with the
maximum comfort for operators.
A couple of red laser spots clearly indicate the center of the reading zone. And the Green-
Red spots, directly projected on the scanned object, communicate the reading result or
even specific conditions when driven by external commands.
Thanks to the continuous image acquisition, the http image mirroring produces a sort of real-
time video, useful feature for local visualization on-screen or also for remote monitoring. The
live streaming uses the standard http protocol for transmission and then a standard web
browser is all that is required for the display.
The complete set of integrated functionalities makes Matrix 450™ a comprehensive solution
for manual scanning, easy to deploy, easy to use and with minimum cost for maintenance.
manual
and
reader
– by
2
43