Table of Contents
Advertisement
SOFTWARE CONFIGURATION
8
8.4.4 Multi Image Acquisition Settings
When controlled variable conditions occur in the application, including multiple code label
reading, multiple Image Acquisition Settings (up to 10), can be defined to create a
database of parameter groups that handle each specific application condition. This database
of pre-defined settings functions cyclically and therefore automatically improves system
flexibility and readiness.
For example, an application may have two stable but different lighting conditions which
require different lighting options. One Image Acquisition Setting could enable a particular set
of parameters (LT-03x Lighting Mode, Exposure Time, Gain, etc.) and a second setting could
enable a different set of these parameters. These two groups will be used cyclically on each
acquisition in order to automatically capture the correctly lighted image.
Image Acquisition Settings are found in the VisiSet™ Calibration parameter setup menu.
By selecting a different number and enabling its Status you can define the parameters for a
new group.
8.4.5 Run Time Self Tuning (RTST)
Run Time Self-Tuning (RTST) increases Matrix's flexibility in the presence of uncontrolled
variable conditions (lighting, code contrast, etc.) by automatically adjusting its acquisition
parameters.
Self Tuning Calibration
In the Calibration parameter setup menu, the Self Tuning parameters manage the Image
Acquisition Setting parameters dynamically. Self Tuning provides automatic adjustment in
run time of different acquisition parameters (Exposure Time and/or Gain) for each captured
image based on calculations performed on previous acquisitions. These dynamic settings will
be used instead of the static settings saved in memory.
to
From
Readable
Not Readable
For more details see the Matrix 450™ Help On-Line.
Self Tuning Image Processing
In the Image Processing parameter setup menu, the Self Tuning parameters manage the
Image Processing and Symbology related parameters. They perform different processing
attempts on the same captured image according to the selected Self Tuning Mode parameter
value: (Symbologies Only, Processing Modes Only, Decoding Methods Only, Code Contrast
Levels Only, Image Mirroring Only, or General Purpose).
For more details see the Matrix 450™ Help On-Line.
133
Advertisement
Table of Contents
