Table of Contents
Advertisement
TYPICAL LAYOUTS
6.2 ETHERNET NETWORKS
6.2.1 External Trigger Ethernet Host
When using a Local Area Network (LAN), one or more Matrix 450™ readers can be
connected to the network by using CAB-GE0x cables. In the example below an External
Trigger is used which is connected through a CBX connection box.
CBX
Power
Ethernet Interface
Auxiliary Serial Interface (Local Echo) (RS232)
External Trigger (for One Shot or Phase Mode)
Matrix 450™ does not support sourcing power towards the CBX in order to
power I/O devices (including the External Trigger). These devices must be
powered from the CBX or from an external source.
NOTE
Matrix 450™
1
2
Hub
Figure 86 - Ethernet Network Layout
3
HOST
6
3
2
95
Advertisement
Table of Contents
