Remote Scale Display Placement/Installation
Lighting Considerations
2-20
provides physical dimensions for the AC/DC Adapter (part
Figure 2-16
number 8-0582).
Figure 2-16. Physical Measurements: AC/DC Adapter
1.23"
(3.1 cm)
The modular Remote Display is designed so that single display heads can
be stacked to form a dual display as shown in
address the specific viewing needs of both the customer and the cashier.
Factors to consider when installing this device are:
•
Lighting Considerations
•
Viewing Angle
•
Remote Display Cabling
The display(s) will be easily readable unless placed in direct sunlight or
other very strong light sources. Light interference will not be a factor in
most installations. For best viewing, the display head(s) can each be
º
rotated up to 180
around the post and/or tilted 15
Figure
2-17a in order to
º
backward or forward.
®
Magellan
8300/8400