Table of Contents
Advertisement
8.5 SETTING MEASUREMENT MODE (SHADE/OPACITY)
When the instrument is set to Shade mode the measurement screen will
show 'ANGLE' in the top left corner:
When the instrument is set to Opacity mode the measurement screen will
show 'WHITE' or 'BLACK' in the top left corner:
To change mode:
1. Press and hold the SCROLL DOWN key and the CANCEL key until
the display shows:
2. Release the keys and then press the SCROLL UP/DOWN key until
the display shows:
3. Press the READ/SELECT key.
4. The display will show:
5. Use the SCROLL UP/
DOWN key to select the
mode required (Shade or
Opacity).
Shade mode
Shade Inst.
Press Read Key
ANGLE
Value
45/0
0.0
WHITE
Value
45/0
0
BLACK
Value
45/0
0
System Set-up
Select Inst Type
Press Read Key
Opacity mode
Opacity Inst.
or
Press Read Key
R
No.
0
No.
0
No.
0
23
Advertisement
Table of Contents
