Table of Contents
Advertisement
Industrial Electronic Devices
CHARACTERISTICS:
The HD67645-A1 are EtherNet/IP / CAN - Converters.
It allows for the following characteristics:
Isolation between EtherNet/IP – CAN – Power Supply;
Two-directional information between EtherNet/IP bus and CAN bus;
Mountable on 35mm Rail DIN;
Wide power supply input range: 8...24V AC or 12...35V DC;
Wide temperature range: -40°C / 85°C [-40°F / +185°F].
CONFIGURATION:
You need Compositor SW67645 software on your PC in order to perform the following:
Define the parameters of EtherNet/IP line;
Define the parameters of CAN line;
Define the list of EtherNet/IP slaves connected to the converter;
Define CAN messages in rx and tx;
Update the device.
ADFweb.com S.r.l.
User Manual EtherNet/IP Master/ CAN
Document code: MN67645_ENG
Revision 1.000
Page 6 of 27
Advertisement
Table of Contents
